Dennis,
I installed a Pertronix ignitor and Lucus 40,000 volt sport coil in my late
1957 BN4 (46049) which also has a BJ8 DM6 distributor. I'm using a .030"
plug gap and runs well. Some on the List have said I could go as high as
.035" gap.
Vrooom vrooom,
John
100-Six Erika the Red
----- Original Message -----
From: "Dennis Broughel" <brougheldp@earthlink.net>
To: "austin healey" <healeys@autox.team.net>
Sent: Friday, September 10, 2004 4:16 AM
Subject: spark plug gap
> Dear list:
> I just installed a petronix ignitor in my distributor, and it works
> well. I have a Longbridge six cylinder with a DM6A distributor. I used a
> petronix part number LU 165 and it was a very easy install. My question is
> with my new pointless Ignition and 40,000 volt sport coil what should I
> gap my spark plug to, I under stand the gap should be widened.
> as always thanks in advance
> Dennis Broughel
> Bn-4..............45281
>
> Dennis Broughel
> brougheldp@earthlink.net
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|