Nick,
The door lock codes or stamped on the lock insert itself. Your heritage
cert. will tell you the original key codes. Many times lock handles are
changed for various reasons, lost keys , accidents,ect. You can always re do
the lock insert ( same code # example FP or FS series ) to match your
original key from the certificate. A trick I have found to remove insert( if
your curious about finding the code ) is to obtain a few keys of the same
series, you can insert a key into the lock( door handle removed from door)
and try and pull the insert out,most of the time you can oull it out one or
two tabs.Insert another key and more often than not it will hit a
combination of tabs to let the lock insert come out of the handle. Then you
can physically see the code stamped on the lock insert. If this is all too
confusing you can contact Pete Groh. I'm sure he can help with finding a
correct combination for you.
Good luck,
Carroll Phillips Top Down Resorations
|