healeys
[Top] [All Lists]

Re: Re: engine lift points

To: "David Ward" <david@bighealey.ltd.uk>,
Subject: Re: Re: engine lift points
From: <wilko2@cox.net>
Date: Wed, 6 Apr 2005 17:26:29 -0400
Use of the rocker studs is fine if done per factory. Must 
be done with rocker assembly in place. The rocker 
shaft blocks/towers will hold the studs straight.
Right angle brackets will be held to the towers with 
nuts. Chain or adjustable rig holds the engine at the 
right angles which can be changed during install. 

Engine and trans together is easiest overall. Saves a 
lot of tight work trying to fit/align and mount trans, 
starter, clutch components, etc.

Rick
San Diego




<Prev in Thread] Current Thread [Next in Thread>