healeys
[Top] [All Lists]

Re: engine lift points

To: wilko2@cox.net, david@bighealey.ltd.uk, goding@the-shire.fsbusiness.co.uk,
Subject: Re: engine lift points
From: GSFuqua1@aol.com
Date: Thu, 7 Apr 2005 02:45:29 EDT
The Oberg Tilt works like a charm for removing and installing.  I have done 
several by myself with the engine hoist and tilt.  Just remember not to rush 
it.  Transmission jack also helps when you are ready to get the end up over the 
crossmember.  This can also be done with a floor jack if the car is low 
enough.  Having the car on a lift however makes the whole process MUCH easier.

Good luck!

Gary Fuqua
Branson, MO




<Prev in Thread] Current Thread [Next in Thread>