Hi Richard,
I believe that the "liquid rubber" was like a Metalastic bush. The oil on
the bushes makes it go to goo.
I have had good success by setting the bush back into the housing with black
silicone. Seems to last fine.
Michael Salter
www.precisionsportscar.com
-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of Richard Bittmann
Sent: Sunday, April 10, 2005 1:37 PM
To: HealeyList
Subject: accellerator pedal shaft
Today I'm reassembling the accellerator pedal but have come to an impasse.
I
remember when disassembling the bronze bushes and housings that there was
some
kind of "gunk" between the cup and bush which with difficulty I removed.
The
parts list and catalogs refer to the "bush & housing assembly" which is
naturally NA.
What do others use to fill this void for restoration? Was it a liquid
rubber
like material which cushions the bush in the cup? Thanks for any direction
you can offer?
Richard Bittmann BJ7
|