Thanks Rich for your reply, I probably should have mentioned that
I have a BT7. My harness came from from British Wiring and I assume they
know what
their doing since so many seem to recommend them.
Should the harness still be black?
Mark
----- Original Message -----
From: "Rich C" <richchrysler@quickclic.net>
To: "Mark and Kathy" <mgtrcars@galaxyinternet.net>; <healeys@autox.team.net>
Cc: "Bob Haskell" <rchaskell@earthlink.net>
Sent: Saturday, September 24, 2005 11:29 AM
Subject: Re: Wire Harness Tracer
> Mark,
> No.
> Actually black with blue tracer was on the main harness of the earlier
> BN2.
> The boot area on a BN2 I believe should be solid black.
>
> FWIW the tracer colour and pattern was unique to each edition and change
> made to the harnesses from the eaeliest cars. For instance an early BN1
> was
> solid black throughout. As soon as a change was introduced, a tracer
> colour
> was introduced into that portion of the harness. The pattern of the boot
> harness was unchanged through the life of the Hundred, therefore that
> portion remained solid black.
> We had been putting up with a "token" yellow tracer on harnesses for many
> years. Today we can get the correct harness and tracer colours from most
> of
> the better suppliers.
> Rich Chrysler
>
> ----- Original Message -----
> From: "Mark and Kathy" <mgtrcars@galaxyinternet.net>
> To: <healeys@autox.team.net>
> Sent: Saturday, September 24, 2005 10:07 AM
> Subject: Wire Harness Tracer
>
>
>> My new wire harness has a "black with blue" tracer for the rear trunk
>> area.
>> Is that correct? I thought they were all "black with yellow". No?
>>
>> Mark
|