Jack -
The engine in a 100 won't run on if you use 89 octane or better. In a
3000, unfortunately, you need high test.... which I buy here at the
pump in Hong Kong !
:-P
Alan
'53 BN1 '64 BJ8
On 3/9/06, Brashear, Jack, N <JNBrashear@garverengineers.com> wrote:
> Hi All, my friend has only run his fresh BN2 engine a few times since a
> total overhaul. He claims to have 8.6 to 1 compression and he has done
> his initial timing, carb settings, etc. up using a vacuum gauge. He
> started with 5 gallons of 87 octane fuel in the tank. Anyway, he has a
> run-on problem and would like to know what he can do to stop it short of
> engaging the clutch while in gear. Any feedback besides using an anti
> run-on accessory would be appreciated. Many Thanks!!
> Jack
|