Jack,
My BJ8 will run-on if the idle is set too high, say, more than 750rpm.
bs
Brashear, Jack, N wrote:
>Hi All, my friend has only run his fresh BN2 engine a few times since a
>total overhaul. He claims to have 8.6 to 1 compression and he has done
>his initial timing, carb settings, etc. up using a vacuum gauge. He
>started with 5 gallons of 87 octane fuel in the tank. Anyway, he has a
>run-on problem and would like to know what he can do to stop it short of
>engaging the clutch while in gear. Any feedback besides using an anti
>run-on accessory would be appreciated. Many Thanks!!
>Jack
>
>
--
***************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
'67 Austin-Healey 3000 '56 Austin-Healey 100M
***************************************************************
|