healeys
[Top] [All Lists]

Re: [Fwd: loose pulley]

To: Jwhlyadv@aol.com
Subject: Re: [Fwd: loose pulley]
From: John Vrugtman <javrugtman@htcnet.org>
Date: Fri, 19 May 2006 07:16:39 -0400
With fresh motor mounts, you should be able to insert a business card 
under the smaller rubber block, old collapsed ones will have the upper 
block forced into the lower one.

Jwhlyadv@aol.com wrote:

>I had a similar problem on my BJ8. It was not that the engine was too far  
>forward but because the engine had sunk too low. Someone on the list offered a 
> 
>way to check motor mounts which completely escapes me at the moment.
> 
>I found that the motor mounts had allowed the engine to settle lower over  
>the past 40 years and a new set of mounts solved my problem.
> 
>Thanks,
>Jim Werner
>Louisville, KY




<Prev in Thread] Current Thread [Next in Thread>