healeys
[Top] [All Lists]

Re: Another Silly Auto Question

To: <healeys@autox.team.net>
Subject: Re: Another Silly Auto Question
From: "Mark and Kathy" <mgtrcars@galaxyinternet.net>
Date: Sat, 19 Aug 2006 10:59:42 -0400
Varsol?  What exactly is this product Rich?   Would mineral spirits do the 
same thing?

Mark

----- Original Message ----- 
From: "Rich C" <richchrysler@quickclic.net>
To: "Mark and Kathy" <mgtrcars@galaxyinternet.net>; <healeys@autox.team.net>
Sent: Saturday, August 19, 2006 9:00 AM
Subject: Re: Another Silly Auto Question


> Mark,
> As long as the paint is glossy, just wipe off with a bit of varsol on a 
> cloth. Soap and water will not cut through grease and oil, and you don't 
> want to be introducing water into areas that could cause rust to start.
>
> Rich Chrysler
>
> ----- Original Message ----- 
> From: "Mark and Kathy" <mgtrcars@galaxyinternet.net>
> To: <healeys@autox.team.net>
> Sent: Saturday, August 19, 2006 6:36 AM
> Subject: Another Silly Auto Question
>
>
>> The engine is in along with the trany.  Now its time to tie up loose ends 
>> and
>> hang all the ancillaries that make these cars run. So the puzzle 
>> continues
>> moving towards the initial start up and first test drive.
>>
>> Looking at the condition of my painted chassis is the difference of night 
>> and
>> day compared to 2 years ago.    But unfortunately the freshly painted 
>> rolling
>> tub is looking a bit tattered lately with all the accumulated finger 
>> prints
>> and of course dust.
>>
>> I am tempted to apply a coat of wax to the chassis surface for protection 
>> and
>> bring back that original  shine.  This would include floors, inner fender
>> wells, frame area, trunk, etc.    Or would just a good doosh of soap and 
>> water
>> be the answer in case I need to stick something down  like carpet or 
>> dynamat
>> later on.
>>
>> Any long term side affects that anyone has run into by doing this?
>>
>> Hey I warned you about the lack of technicalisity of the question in 
>> advance.
>> :) :) :)
>>
>> Mark




<Prev in Thread] Current Thread [Next in Thread>