Ed:
I'm not sure what you're saying here.
The hydraulic line that has to be added runs from the newly installed Nissan
brake master cyl. to the newly added Healey clutch slave cylinder. The Nissan
master is mounted to the Healey frame, has it's own integral fluid reservoir,
and is actuated by a modified mechanical linkage from the original brake
pedal.
Don't know how else to explain it to you.
Cheers, ------------ Earl
----- Original Message -----
From: Ed's Shop
To: Earl Kagna
Sent: Saturday, May 03, 2008 6:08 PM
Subject: Re: [Healeys] BN1 or BN2 Transmission Conversion
<<I'm looking at my Smitty instruction book. The 4 cyl. Healey uses a '62 -
'72 Nissan pickup hydraulic clutch master cyl. that mounts to an existing frme
stud in place of the Healey's original mechanical clutch linkage. A hydraulic
line is then run to a 6 cyl. clutc slave.>>
WHAT, Earl????????????? Master Cylinder I would believe<G>!!
Ed
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|