What ever way you fit the boxes do not forget to turn the cam wheels
180: so that you can use the unworn part of the cam wheels. Lubricate
with grafite grease or MoS2 grease.
Kees Oudesluijs
Warthodson@aol.com schreef:
> John, et all,
> I am referring to the two gear boxes that pass thru the shroud and the wiper
> arms atttach to them, not the gear in the motor assembly. The parts book
> indicates that the cable is above the gear, but I would like to verify this
> because I am helping a friend re-assemble a BJ7 & his is a very tight fit
>when
> oriented this way, perhaps because the tubing around the cable was badly
>bent.
> It seems to fit slightly better with the cable below the gear.
> Thanks,
> Gary
>
>
>
> In a message dated 2/9/2009 10:04:14 A.M. Central Standard Time,
> loftusdesign@cox.net writes:
>
> Gary,
>
> The Gear is below the cable. Here's a few pictures to show the assembly ..
>
> http://www.loftusdesign.net/wiper3.jpg
> http://www.loftusdesign.net/wiper4.jpg
> http://www.loftusdesign.net/wiper5.jpg
>
> Cheers,
> John
>
> -----------------
>
> When correctly installed, is the gear (in the gear box) above or below the
> actuating cable (on a BJ7)?
>
> Gary
>
>
>
> **************A Good Credit Score is 700 or Above. See yours in just 2 easy
> steps!
>
>(http://pr.atwola.com/promoclk/100000075x1218550342x1201216770/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=fe
> bemailfooterNO62)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs@chello.nl
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|
