healeys
[Top] [All Lists]

Re: [Healeys] Motor mounts - RH/LH?

To: healeys@autox.team.net, Warthodson@aol.com
Subject: Re: [Healeys] Motor mounts - RH/LH?
From: Michael Salter <msalter@precisionsportscar.com>
Date: Wed, 15 Apr 2009 16:03:24 -0700 (PDT)
They are different Gary, and if you were to bead blast them you would find an
LH on one and a RH on the other..
I'm pretty sure the LH one goes on the left and the RH goes on the right ;-)

Michael Salter   

--- On Wed, 4/15/09, Warthodson@aol.com <Warthodson@aol.com> wrote:

From: Warthodson@aol.com <Warthodson@aol.com>
Subject: [Healeys] Motor mounts - RH/LH?
To: healeys@autox.team.net
Received: Wednesday, April 15, 2009, 9:56 PM

My parts book indicates that the motor mount brackets that bolt to the
engine are handed on a BJ7/8, but upon very close examination I cannot find
any
 RH or LH stamping on either bracket, or part number stamped on them. My
brackets  appear to be identical & the (4) bolt holes are slotted which seems
to  indicate that they would be "universal". Do I have one of those very
rare &  valuable "special test cars" that I have read about or is there
another
 explanation?  FYI, I tried searching the archive to no avail.
Thanks,
Gary Hodson
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>