I have used them for about 8 years and also have 3 here in the shop
with them installed, We also have about 5 others installed on
customer cars. Other than a couple of small mods to the bottom side
of the intake manifolds, removing the manifold drains and modifying
the front out rigger if it is not a BJ8 we have only had one that was
a problems. The pipes did not line up parrallel to the muffler. We
ended up having to cut the pipe just below the junction and making a
new pipe with matching bends and welding onto the headers.
What is the problem you are having?
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
..
..
On Apr 22, 2009, at 6:59 AM, Warthodson@aol.com wrote:
> I would like to hear the experiences from anyone that has installed
> a Denis
> Welch exhaust header #CEXS120 on a left hand drive 3000. I am
> aware of the
> modifications required to the intake manifold & the outrigger (if
> not a
> BJ8). These areas are not where I am experiencing problems.
> Thanks,
> Gary Hodson
> **************Access 350+ FREE radio stations anytime from anywhere
> on the
> web. Get the Radio Toolbar!
> (http://toolbar.aol.com/aolradio/download.html?
> ncid=emlcntusdown00000003)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healeydoc@sbcglobal.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|