Both sides and on the sliding surfaces of the calipers. I always use
copper grease from a cannister. With spray there is always the chance of
contamination.
Kees Oudesluijs
NL
R. Price Lindsay schreef:
> List -
>
> I am about to put new brake pads on my BJ8 along with anti-squeal
> shims. Should I apply anti-squeal spray to any side of the shims or
> pads? If so, which side(s)?
>
> Price Lindsay
> 67 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs@chello.nl
>
> http://www.team.net/archive
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.1/2212 - Release Date: 07/01/09
>05:53:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|