healeys
[Top] [All Lists]

Re: [Healeys] New Project BN1 3 speed Laygear

To: Rich C <richchrysler@quickclic.net>
Subject: Re: [Healeys] New Project BN1 3 speed Laygear
From: "Curt/Nancy Arndt" <cnaarndt@gmail.com>
Date: Sun, 5 Jul 2009 15:23:17 -0700
Rich,

I might be interested since I have two later gearboxes and one early gearbox
that I'd like to convert if all of the pieces become available.

Curt

On Sat, Jul 4, 2009 at 9:06 PM, Rich C <richchrysler@quickclic.net> wrote:

> Hello all,
>
> I have been working with a brilliant machinist who is into CNC machining,
> CAD
> programming, and specializes in gear cutting.
> He's looking for challenges in his business and asked me what's needed. I
> handed him a later BN1 laygear with a shattered 2nd gear (3rd gear
> internally), explaining that this seems to be their weakness and if I had
> good
> laygears and 2nd gears, I could reassemble a number of BN1 gearboxes and
> put
> them back into service.
> He happily took this as a personal challenge and has come back to me 4
> weeks
> later with quotes and a metallurgy report on the original.
> It seems that the original is very hard, too hard in his opinion, with a
> Rockwell reading of 64 to 66 which is likely why when they let go, they
> simply
> shatter like glass, taking the other gear with it.
> Anyway, making the complete laygear new is no problem. Machining and
> installing the bronze inserts in each end would be included as part of the
> process.
> Of course as with anything, the more pieces made, the cheaper it will be.
> I am no machinist, but I'll quote what he has said. He gave me 3 prices for
> different hardness qualities.
>
> All case hardening to be approx. .020" deep as per original.
>
> He recommends 9310 case hardened where:
> -  5 pieces @  $1576
> -  20 pieces @ $1335
> -  50 pieces @ $1120
>
> Next he quoted 8620 case hardened where:
> - 5 pieces @ $1420
> - 20 pieces @ $1183
> - 50 pieces @ $1034
>
> Last, he quoted 4140 Nitride where:
> 5 pieces @1490
> 20 pieces @1254
> 50 pieces @1105
>
> These can be done as soon as there is an order placed of at least 5 pieces
> minimum. We would ask for 50% up front.
>
> I stated that I would need to run a prototype in a gearbox on the road to
> prove out the product before accepting orders.
> Please note that this would be a duplicate of the later laygear, as applied
> from gearbox 5146, being part number 1B 3693, laygear c/w bushes.
>
> He's now looking into doing the corresponding 2nd gear assembly (3rd gear
> internally)
>
> Interested? Discussion please.
>
> Rich Chrysler
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as cnaarndt@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>