healeys
[Top] [All Lists]

Re: [Healeys] healey motor/gearbox measurements

To: HealeyRick <healeyrick@yahoo.com>
Subject: Re: [Healeys] healey motor/gearbox measurements
From: Linwood H Rose <linwoodrose@mac.com>
Date: Sun, 05 Jul 2009 18:35:47 -0400
Thanks, Rick. I appreciate the assistance!

Lin Rose

On Jul 5, 2009, at 6:12 PM, HealeyRick wrote:

> On my 29Dthe height from the lowest part of the oil pan to the top  
> of the T was more like 29", everything else matches Rich's  
> dimensions.  Perhaps Rich was measuring height in Canadian inches  
> and I was measuring in American inches?
>
> Rick
>
> --- On Sat, 7/4/09, Rich C <richchrysler@quickclic.net> wrote:
>
> From: Rich C <richchrysler@quickclic.net>
> Subject: Re: [Healeys] healey motor/gearbox measurements
> To: "Linwood H Rose" <linwoodrose@mac.com>, "healeylist" 
><healeys@autox.team.net 
> >
> Date: Saturday, July 4, 2009, 11:48 AM
>
> Lin,
>
> A couple of weeks ago a good portion of the list members were  
> heading to Conclave!
>
> - height from bottom of oil pan to top of T pipe on rocker cover 27"
> - length from fan centre to engine back plate 33 1/2"
> - length from fan centre to end of propshaft on gearbox/od 64"
> - Width from distributor across to air cleaners approx. 25".
>
> Rich Chrysler
>
> ----- Original Message ----- From: "Linwood H Rose" <linwoodrose@mac.com 
> >
> To: "healeylist" <healeys@autox.team.net>
> Sent: Saturday, July 04, 2009 4:05 AM
> Subject: [Healeys] healey motor/gearbox measurements
>
>
> > Hi folks
> > I posted this a couple of weeks ago without a response. Thought I   
> would try one more time before I give up. Thanks!
> >
> >
> > Does anyone have linear measurements for the engine with usual   
> components attached? Or, if there is a document like the frame   
> "blueprint" you can refer me to, I would appreciate it. I am  
> looking  for things like height from bottom of oil pan at lowest  
> point to the  top of the rocker cover (or the vent "T" pipe on the  
> cover), depth  from fan center to engine backplate, depth from fan  
> center to end of  the gearbox, width of the block and width from the  
> air cleaners to the  distributor (widest point of the assembly).
> >
> > Thanks for sharing if someone has this information.
> >
> > Lin
> > 1960 BT7 "The Bloody Beast"
> > 1959 AN5 Bugeye
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> >
> > Healeys@autox.team.net
> > http://autox.team.net/mailman/listinfo/healeys
> >
> > You are subscribed as richchrysler@quickclic.net
> >
> > http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healeyrick@yahoo.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>