healeys
[Top] [All Lists]

Re: [Healeys] Speedo Cable and the washer

To: "Bob Johnson" <bjsbj8@gmail.com>, "Healeys" <healeys@autox.team.net>
Subject: Re: [Healeys] Speedo Cable and the washer
From: "R. Price Lindsay" <price@advocateadvisors.com>
Date: Thu, 6 Aug 2009 15:53:40 -0500
Having just gone through two (2) angle drives, a speedo rebuild and a
speedo cable, it has my understanding that there is no washer at the
speedo end of the cable but there is a copper washer between the angle
drive and the overdrive. I have heard that two (2) washers can be used
at the angle drive/od connection - is there a benefit to this and is it
suggested in all cases?

In other words, I have not put a washer at the speedo end and only one
washer at the angle drive.  Is this wrong?  Please tell me before I blow
up another $58.00 angle drive!

Thanks

Price Lindsay
67 BJ 8

-----Original Message-----
From: healeys-bounces@autox.team.net
[mailto:healeys-bounces@autox.team.net] On Behalf Of Bob Johnson
Sent: Thursday, August 06, 2009 2:58 PM
To: Healeys
Subject: [Healeys] Speedo Cable and the washer

It has been suggested that speedo wobble can be caused by the tip of
the cable going too far into the back of the speedo. On my cable the
distance between the shoulder on the cable head end to the tip is
approx. .33 in. How long should this distance be? And re the washer,
what size, id and od? Mine is a late BJ8, BTW.

Bob Johnson
BJ8
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as price@advocateadvisors.com

http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>