healeys
[Top] [All Lists]

Re: [Healeys] hubs .. splines - autotightening

To: <wilkmanracing@aol.com>, <bspidell@comcast.net>,
Subject: Re: [Healeys] hubs .. splines - autotightening
From: "R. Price Lindsay" <price@advocateadvisors.com>
Date: Wed, 26 Aug 2009 08:38:06 -0500
I've used a wooden sleeve.  It split after a few uses.

Price Lindsay
67 BJ 8

-----Original Message-----
From: healeys-bounces@autox.team.net
[mailto:healeys-bounces@autox.team.net] On Behalf Of
wilkmanracing@aol.com
Sent: Wednesday, August 26, 2009 8:33 AM
To: bspidell@comcast.net; cnaarndt@gmail.com
Cc: healeys@autox.team.net
Subject: Re: [Healeys] hubs .. splines - autotightening

I used to use a lead hammer as a cushion between a copper hammer and the
knock off.? Worked great and added life to both hammers.? What do rolks
think of the wood sleeves you can buy or the long-handled wrench that
fit over the knock off?



Bill Wilkman

BT7

AN5


-----Original Message-----
From: Bob Spidell <bspidell@comcast.net>
To: Curt/Nancy Arndt <cnaarndt@gmail.com>
Cc: healeys@autox.team.net
Sent: Tue, Aug 25, 2009 9:25 pm
Subject: Re: [Healeys] hubs .. splines - autotightening



What's the problem with lead hammers? I've used them (4lb) for years
with no problems (kind of a waste of lead, though).?
?
Bob?
?
?
Curt/Nancy Arndt wrote:?
> Mirek,?
> > Cars are judged as they would have come from the factory. As such
there?
> would most likely be *minor* marks on the knockoffs when the wheels
were put?
> on at the factory. Plus, our Concours standards encourages that the
cars be?
> driven, and I would be somewhat lenient with minor marks. Anything
more?
> would most likely result in 1/4 point for each knockoff (1 point
total) for?
> condition.?
> > However, If I was purchasing an Austin Healey new back in the day
and the?
> knockoffs were beat up a bit I'd most likely ask the dealer for new
ones.?
> > I spent a lot of time welding up my original steel knockoffs on my
BN1 and I?
> personally won't use the original lead hammer. I also don't need to
tell?
> you the trouble and research Roger Moment did to replicate the
original?
> hammer in the BN1s, of which I have a replica.?
> > What I prefer is the shot filled rubber hammer (4 pound Pittsburgh
brand)?
> sold at Harbor Freight. It works just fine.?
> > Curt Arndt?
> AH Concours Committee?
e?
> ?
-- *******************************************************************?
Bob Spidell San Jose, CA bspidell@comcast.net?
?
*******************************************************************?
_______________________________________________?
Support Team.Net http://www.team.net/donate.html?
?
Healeys@autox.team.net?
http://autox.team.net/mailman/listinfo/healeys?
?
You are subscribed as wilkmanracing@aol.com?
?
http://www.team.net/archive?
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as price@advocateadvisors.com

http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>