healeys
[Top] [All Lists]

Re: [Healeys] Conversion to BJ8 calipers

To: Healey Lista <healeys@autox.team.net>
Subject: Re: [Healeys] Conversion to BJ8 calipers
From: Magnus Karlsson <magnuskarlsson@bornet.net>
Date: Tue, 20 Apr 2010 07:16:35 +0200
There is a metric type 16 caliper that will fit the earlier cars. The distance
between the mounting holes is exactly the same as on the type 14.
Other than this it4s exactly the same caliper as used on the BJ8.
This caliper was used on European Fords such as Escorts, Granada and Taunus in
the early seventies. Look for cars with unventilated discs
and you will get the right one. If this sounds too complicated most of the
suppliers in England have them in stock but at a dearer price.

Magnus Karlsson

Bores Motor Corporation AB

www.concourshealeys.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>