healeys
[Top] [All Lists]

Re: [Healeys] overdrive planetary alignment

To: <healeys@autox.team.net>
Subject: Re: [Healeys] overdrive planetary alignment
From: "Mark LaPierre" <lapierrem@sbcglobal.net>
Date: Tue, 20 Apr 2010 05:41:24 -0400
Equidistantly?   Have you been reading the Edbonics book of grammar 
confusion Alan?

ML

----- Original Message ----- 
From: "Alan Seigrist" <healey.nut@gmail.com>
To: "Ed Woods" <fogbro1@comcast.net>; <healeys@autox.team.net>
Sent: Monday, April 19, 2010 8:36 PM
Subject: Re: [Healeys] overdrive planetary alignment


> There's nothing bizarre about this at all.  The annulus will still
> rotate around the sun wheel even if the planetary gears are installed
> one or two teeth off from equidistant distribution.  The annulus will
> simply rotate off centre to the sun gear, and the planetary gears will
> mesh slightly out of alighnment.
>
> The dots help make sure each of the planetary gears are mounted
> equidistantly from each other, that's all.
>
> Alan
>
> On 4/19/10, Ed Woods <fogbro1@comcast.net> wrote:
>> Healey List,
>>
>>
>>
>> Here's what Nelson Riedel of Buckeye Triumphs wrote about my question:
>>
>>
>>
>> Installing Epicyclic Gear: The sun gear can be installed in the planter
>> carrier with the planet gears in various positions.   If the gears are 
>> not
>> in
>> the correct position, the sun gear shaft will be off center.    This 
>> would
>> be
>> recognized when it was impossible to pass the main shaft through the sun
>> gear,
>> the planet carrier and the unidirectional clutch. There are indexing dots
>> stamped into the  top of each of the planet gears.  Each gear was turned 
>> so
>> that the dot is on the outside and a line through the dot and the center 
>> of
>> the planet gear shaft also passed through the center of the planet 
>> carrier
>> as
>> show in the left photo below.  The sun gear was inserted with the planet
>> gears
>> aligned as indicated.  The dot alignment was verified after the sun gear 
>> was
>> in position.  The three dots didn't line up as indicated, so I did it 
>> over
>> and
>> got it right.  The planet carrier with sun gear was then inserted into 
>> the
>> annulus.   The sun gear was rotated back and forth slightly to get the 
>> gears
>> to mesh properly so that the planet carrier would drop into the annulus..
>>
>>
>>
>> So position does matter!
>>
>>
>>
>> Ed Woods
>> _______________________________________________
>> Healeys@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>>
>
> -- 
> Sent from my mobile device
>
> Alan
>
> '52 A90
> '53 BN1
> '59 Jag Mk IX
> '64 BJ8
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/lapierrem@sbcglobal.net 
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>