I just used Alumaweld to repair a bunch of holes in my shroud. It uses a
propane torch to weld the material. They have a video on the site where they
use the product to build up a broken alternator bracket, drill it out and
then re-install the alternator.
*http://tinyurl.com/25ktnmw NFI*
*
*
***The car is ready for paint!!! I found a good PPG code for ice blue and
OEW.
*
On Tue, Oct 26, 2010 at 7:50 PM, Elton Schulz <eschulz@frontiernet.net>wrote:
> I'm using epoxy to repair some areas of my rear shroud.
> Elton, BJ7 in progress
> ----- Original Message ----- From: "Jerry Costanzo" <
> grumpyinloomis@ssctv.net>
> To: <healeys@Autox.Team.Net>
> Sent: Tuesday, October 26, 2010 9:18 PM
> Subject: [Healeys] dentist epoxy for car restoration
>
>
> I was sitting in the Dentist chair getting a crown replaced, and I was
>> amazed
>> at the epoxy tools and grinders that were being used. I will bet that
>> epoxy
>> might be useful in fixing plastic components or other broken parts. Has
>> anyone tried this?
>>
>> Jerry
>> _______________________________________________
>> Healeys@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/eschulz@frontiernet.net
>>
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3@gmail.com
>
--
Ira Erbs
DIGS-4 SOLUTIONS
IT CONSULTANTS
Portland, OR
_______ Austin Healey 3000 _______
(______ \____1960 BT7____/_______)
(_________________________)
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|