I would have to fabricate brackets for that!!! I don't have time right now!
;)
Robert Duquette
Ottawa ON Canada
1965 RHD BRG Austin-Healey Sprite ( project )
1967 RHD MG Midget ( aka: Miss Marple )
1955 Austin-Healey 100 BN1 ( aka: Carmen )
http://www3.sympatico.ca/robertduquette/temp/2009FallTour.jpg
Date: Mon, 1 Nov 2010 15:06:15 -0700
From: healeyrick@yahoo.com
Subject: Re: [Healeys] space between engine and rad
To: healeys@autox.team.net; robertduquette@sympatico.ca
Robert,
Install your radiator so the cooling fins are completely shredded by your fan,
then back off an inch. :)
Rick
Follow My Nasty Boy Build: http://tinyurl.com/yj52fwo
--- On Mon, 11/1/10, Robert Duquette <robertduquette@sympatico.ca> wrote:
From: Robert Duquette <robertduquette@sympatico.ca>
Subject: Re: [Healeys] space between engine and rad
To: "Healeys" <healeys@autox.team.net>
Date: Monday, November 1, 2010, 5:35 PM
Thanks!
That's 3 installed your way; and only mine installed the other, so far.
> From: ah@jharper.demon.co.uk
>
> Robert
>
> On both of my 100s the bracket is fitted the opposite way to those in
> your photo. This means that the radiator leans back; about 3/8" at the
> top bracket. This means that I have no real problem changing a fan belt.
>
> The only thing I will add is that in both cases the radiators have been
> repaired at some time in their life so I cannot guarantee that the
> radiators were fitted this way originally.
>
> Regards
> --
> John Harper
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healeyrick@yahoo.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|
