healeys
[Top] [All Lists]

Re: [Healeys] Great Healey folks

To: "'edic'" <edic@tampabay.rr.com>, "'Oudesluys'"
Subject: Re: [Healeys] Great Healey folks
From: "Simon Lachlan" <simon.lachlan@homecall.co.uk>
Date: Thu, 18 Nov 2010 19:58:04 -0000
How about (plumbing type) silicon sealant?
Simon

-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of edic
Sent: 18 November 2010 17:33
To: Oudesluys
Cc: Healeys
Subject: Re: [Healeys] Great Healey folks

Kees,

Thanks for the info. My float actually is leaking from the very end where 
there is a seam and a mold  injection site, if I said that right.  I can 
drill a hole in the plastic and let the gasoline out, but I was wondering 
what I would use to seal the hole that would be impervious to gasoline. 
Since this will be a spare, which I hope I will never need, I would like to 
try and seal it, if nothing more than for grins.

Mel


----- Original Message ----- 
From: "Oudesluys" <coudesluijs@chello.nl>
To: "edic" <edic@tampabay.rr.com>
Cc: "Healeys" <healeys@autox.team.net>
Sent: Thursday, November 18, 2010 3:33 AM
Subject: Re: [Healeys] Great Healey folks


> To prevent damage to your plastic fuel gauge sender float,just bend back
> a bit the last 2mm on the hook or file away the sharp edge at the end.
> It is this sharp end that digs in the plastic float which eventually
> results in a leak.
> A brass float may benefit from the same treatment as well.
> Kees Oudesluijs
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/simon.lachlan@homecall.co.uk
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>