Re: [Healeys] Seat belt webbing

[Austin Healey <pajtamuvek@gmail.com>]

Just one addition: do not veld theese plates. If You need to fix them, use
silicon glue instead.

G

2011/3/1 Oudesluys <coudesluijs@chello.nl>

> The bolts through the sheet  metal should be fitted with special
> spreader plates about 3mm thick and about 2"x1" in size. Usually a nut
> is welded to it. A large washer is not enough.
> I have always been surprised that that is enough to hold about 20kN. It
> will deform but not pull through.
> Kees Oudesluijs
> NL
>
> [demime 1.01d removed an attachment of type text/x-vcard which had a name
> of coudesluijs.vcf]
> _______________________________________________
>  Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/pajtamuvek@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums