healeys
[Top] [All Lists]

[Healeys] Powder coat steering box

Subject: [Healeys] Powder coat steering box
From: eyera3 at gmail.com (I Erbs)
Date: Sun, 6 Mar 2011 20:55:36 -0800
References: <6.2.3.4.2.20110306145045.020313c0@pop.att.yahoo.com>
Most solder 1500 degrees

Ira Erbs
DIGS-4 Solutions
Portland, OR

sent from my Droid, please excuse typos and random self corrections because
my phone has It's own ideas about what word I meant to write

On Mar 6, 2011 8:34 PM, "john spaur" <jmsdarch at sbcglobal.net> wrote:
> I would like to powder coat the steering box and column. However, the
> column is soldered to the steering box. The powder that I have been
> using curs @ 400 degrees F which may be very close to or over the
> melt point of the solder.
>
> Have people experienced a problem with the column separating from the
> box? Does anyone know the melting point of the solder that was used?
> Any suggestions or comments?
>
> Thank you,
> John Spaur
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/eyera3 at gmail.com

<Prev in Thread] Current Thread [Next in Thread>