We have steering boxes powder coated all the time and have no
problems with the solder
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Mar 6, 2011, at 2:53 PM, john spaur wrote:
> I would like to powder coat the steering box and column. However,
> the column is soldered to the steering box. The powder that I have
> been using curs @ 400 degrees F which may be very close to or over
> the melt point of the solder.
>
> Have people experienced a problem with the column separating from
> the box? Does anyone know the melting point of the solder that was
> used? Any suggestions or comments?
>
> Thank you,
> John Spaur
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/
> healeydoc at sbcglobal.net
|