Henry - If you don't use the cold air box, you can put a 1/8" to 1/4"
phenolic spacer in there...
On Wed, Apr 20, 2011 at 2:16 PM, <Josef.Eckert at t-systems.com> wrote:
> Henry,
> On 100M Carburetors there is only a paper gasket between the carburetor and
> the intake manifold. That`s one reason why they are prone to overheating
the
> carbs (at short stops, congestions, filling stations etc.) and causing
vapour
> leaks.
>
> Josef Eckert
> Konigswinter/Germany
>
>
>
> -----Urspr|ngliche Nachricht-----
> Von: healeys-bounces at autox.team.net [mailto:healeys-bounces at
> autox.team.net]
Im
> Auftrag von Henry Morrison
> Gesendet: Mittwoch, 20. April 2011 06:19
> An: healeys at autox.team.net
> Betreff: [Healeys] Spacers on 100M Carburetors?
>
> Is there supposed to be a spacer between the carburetor and the intake
> manifold on the 100M? Sure seems like there should be one. Thanks in
> advance.
>
> Henry Morrison, Albuquerque, NM
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
|