That means that if you intend to use the cold air box there is no space for
the spacers ?
Has Henry considered a heath shield ?
Jose
Sent from my iPad
On Apr 20, 2011, at 1:55 AM, Alan Seigrist <healey.nut at gmail.com> wrote:
> Henry - If you don't use the cold air box, you can put a 1/8" to 1/4"
> phenolic spacer in there...
>
>
> On Wed, Apr 20, 2011 at 2:16 PM, <Josef.Eckert at t-systems.com> wrote:
>> Henry,
>> On 100M Carburetors there is only a paper gasket between the carburetor
and
>> the intake manifold. That`s one reason why they are prone to overheating
> the
>> carbs (at short stops, congestions, filling stations etc.) and causing
> vapour
>> leaks.
>>
>> Josef Eckert
>> Konigswinter/Germany
>>
>>
>>
>> -----Urspr|ngliche Nachricht-----
>> Von: healeys-bounces at autox.team.net
[mailto:healeys-bounces at autox.team.net]
> Im
>> Auftrag von Henry Morrison
>> Gesendet: Mittwoch, 20. April 2011 06:19
>> An: healeys at autox.team.net
>> Betreff: [Healeys] Spacers on 100M Carburetors?
>>
>> Is there supposed to be a spacer between the carburetor and the intake
>> manifold on the 100M? Sure seems like there should be one. Thanks in
>> advance.
>>
>> Henry Morrison, Albuquerque, NM
>> _______________________________________________
>> Healeys at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jvvmusme at yahoo.com
|