healeys
[Top] [All Lists]

[Healeys] Ratchet Spanners

Subject: [Healeys] Ratchet Spanners
From: greylinn at ozemail.com.au (Peter & Veronica)
Date: Sat, 30 Apr 2011 14:55:09 +1000
References: <DD21FD95FD27419DAB68BB30880C4A7A@PatrickQuinnPC> <4DBB91A5.4030600@comcast.net>
Hi Patrick

I bought a set of 4 Imperial 3/8", 7/16", 1/2", 9/16", Crescent brand, from 
either Trade Tools Direct or Glenfords a couple of years ago. They were 
around $60 as I recall. Good quality, quite fine around the ratchet end (not 
bulky like some of the cheapo fabricated ones) My most used spanners 
(wrenches!)

Cheers

Peter

-----Original Message----- 
From: Bob Spidell
Sent: Saturday, April 30, 2011 2:35 PM
To: Patrick and Caroline Quinn
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Ratchet Spanners

Like these?

http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_x_25984315-P_x_x


There are several types.  Some have ratchets on both ends, but I prefer the 
ratchet/box end type.  Also, you want the
ones with the lever to switch directions (without the lever you have to turn 
the wrench over to reverse).

These wrenches are very handy.  I have a set of the Sears (Craftsmen), and 
the half-inch that fits the nuts on my HD8s'
air filters is worth the price.

Bob



On 4/29/2011 9:20 PM, Patrick and Caroline Quinn wrote:
> G'day
>
>
>
> Recently a friend showed me a set of spanners (wrenches to you) that he
> bought at Sears in the US.
>
>
>
> They were open on one end and on the other end they were ring but with a
> built in ratchet. Now that would be a good addition to my tool collection 
> I
> thought, but at just under $100 for a set of 5 here in Australia a little
> expensive. I went looking at the Sears online catalogue, but didn't have 
> any
> success.
>
>
>
> Would anyone be able to steer me in the right direction to an online 
> outlet
> in the US for such a tool.
>
>
>
> Many thanks and Hoo Roo
>
>
>
> Patrick Quinn
>
>
>
> PS. Slowly dismantling the BN3. To remove the carburettors the heater
> ducting has to come out - to remove the ducting the grille has to be
> removed. And so on.
/healeys/greylinn at ozemail.com.au 

<Prev in Thread] Current Thread [Next in Thread>