[Healeys] brake pipe threaded ends

[bspidell at comcast.net (Bob Spidell)]

At some point in your brake pipe-making career you will make the best flare 
you've ever made then realize you forgot to 
put the fitting on the tube first (or you'll put it on backwards).

Guaranteed.

Bob



On 6/18/2011 8:04 PM, john spaur wrote:
> Tom,
>
> The flare nut is 3/8" x 24 tpi (BT7 caliper) and you used to be able to find 
> them at most auto supply stores. The nut 
> wrench size will be 3/8" o
...

*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************