healeys
[Top] [All Lists]

[Healeys] Wire wheel hubs - how?

Subject: [Healeys] Wire wheel hubs - how?
From: tomfelts at windstream.net (Tom Felts)
Date: Wed, 20 Jul 2011 20:01:44 -0400
I 2nd Greg's comments.


---- Greg Lemon <glemon at neb.rr.com> wrote: 

=============
Alright, I have tried to resist, but can't help myself here, nothing against 
you finger tight guys, but I have always wacked my knock ons tight with a 
copper or lead hammer, I understand the theory of self tightening, it 
probably works to some extent, but I have a number of thoughts about it:

1.  If you want it tight why not do it yourself instead of trusting the self 
tightening theory.

2.  I have purchased several cars with very worn out wheels and hubs, if 
self tightening works so well I would think they would tighten themselves to 
the point where they did not rock back and forth and wear out the splines, 
if they torque themselves to ideal torque why do they wear out?.

3.  Once I have replaced bad wheels and hubs and used my practice of 
whacking them on good I have had no wear or problems with my hubs or 
splines.

Greg Lemon
Happy Whacker since 1983
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/tomfelts at 
windstream.net

<Prev in Thread] Current Thread [Next in Thread>