Hi John
that is a price. $100, is what is have been quoted here for a generator
rebuild
kind regards
ed
Historian, AHCUSA
john spaur wrote:
Jack,
I recently had a local autoelectric shop replace the cloth on the
field coils. It cost around $38. I replaced the bearing and rivets
because they did not have the original style but they could have done
that two and I installed the new brushes - very easy stuff. They
recommended against having the commuter turned because they can crack;
you can check it to see how worn it is. A generator rebuild should
cost around $100. You need the drive end bearing, commuter brushes,
the rear bronze race and possibly the two springs that press the
brushes against the commuter.
John
At 09:07 PM 4/20/2012 +0000, Bob Spidell wrote:
More than likely the 'restorer of cars' would have farmed-out the job
to a local shop (and doubled the cost).
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|