[Healeys] for those really interested inBN1 Detail

[bspidell at comcast.net (Bob Spidell)]

Dry.  Sufficiently torqued down, the inner bearing races and both spacers 
won't/shouldn't turn.

I used to pack the whole cavity with grease but read somewhere--possibly the 
shop manual--to only pack the bearings.

Bob


On 5/10/2012 5:54 PM, Tom wrote:
> Hi,
>
> I'm starting to reassemble my front BJ8 hubs.  Should the distance piece be
> greased or go in dry?  Does it turn on the spindle?
>
> thanks,
>
> Tom
>
>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************