Re: [Healeys] for those really interested inBN1 Detail

[Bob Spidell <bspidell@comcast.net>]

Dry.  Sufficiently torqued down, the inner bearing races and both spacers 
won't/shouldn't turn.

I used to pack the whole cavity with grease but read somewhere--possibly the 
shop manual--to only pack the bearings.

Bob


On 5/10/2012 5:54 PM, Tom wrote:
> Hi,
>
> I'm starting to reassemble my front BJ8 hubs.  Should the distance piece be
> greased or go in dry?  Does it turn on the spindle?
>
> thanks,
>
> Tom

--
*******************************************************************
Bob Spidell           San Jose, CA            bspidell@comcast.net

*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net