[Healeys] for those really interested inBN1 Detail

[healeyguy at bredband.net (Per Schoerner)]

The distance piece also makes the stub axle stronger. It should 
absolutely not be allowed to turn with the wheel, and it should also not 
be omitted when assembling the front wheel hub.

Per in Sweden

WILLIAM B LAWRENCE skrev 2012-05-11 06:40:
> The distance piece and shims do not need to be greased and should not turn on
> the stub axle. they bear on the inner bearing races and are pinched between
> them. Their purpose is to allow the bearings to be set as close to zero
> clearance as possible without introducing any preloading.