If the block or head have been skimmed the marks do not line up properly
any more. Choosing the nearest match is probably best. Often a thicker
head gasket can be fitted to help out.
Kees Oudesluijs
NL
Op 25-10-2012 2:47, Jonathan Quandt schreef:
> I am installing a new crank gear on a 100-4 and the cam gear mark does
> not quite line up as it should according to the pictures in the manual
> with #1 at TDC. How close is close enough? Should I bite and order an
> adjustable cam gear? Cheers, JQ
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
--
Kees Oudesluijs
Dorpsstraat 183
2995XG Heerjansdam
T: 078-677 1233
E: coudesluijs@chello.nl
Technische commissie Jensen Healey en GT
Het Jensen Genootschap Holland
www.jensenholland.nl
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|