healeys
[Top] [All Lists]

Re: [Healeys] BN1 and BN2 front fenders - check me on this please.

To: "fiat500f@aol.com" <fiat500f@aol.com>
Subject: Re: [Healeys] BN1 and BN2 front fenders - check me on this please.
From: Alan Seigrist <healey.nut@gmail.com>
Date: Thu, 28 Feb 2013 12:33:21 +0800
Cc: "healeys@autox.team.net" <healeys@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <8CFE3800705A44E-1334-88AAC@webmail-m138.sysops.aol.com>
Very early BN1s had even more metal.  Too bad Rich isn't here to answer
this, but sometime in 53 or 54 they cut it back a bit,  then cut it further
with the BN2.  Maybe John Harper would know offhand.

Alan

On Thursday, February 28, 2013, wrote:

> I need to check something.  With the 100-4, there are the BN1 front
> fenders,
> and the BN2 front fenders.  The easiest (only?) way to tell them apart is
> to
> measure the distance from the top of the wheel opening to the top of the
> fender.  Here is the Austin Healey service note about it.
> http://www.acmefluid.com.au/larry/a421.jpg
> It notes that the measured distance for the BN1 is 9 1/2 inches, and 9
> inches
> for the BN2.  I would SWEAR it was 11 inches for the BN1 and 9 inches for
> the
> BN2.  I just seem to have this strongly in my memory.  Am I wrong?  I would
> assume that the Healey service note is correct, but, dang!  :)
>  - Paul B.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net <javascript:;>
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>