On the "old style?" bellows thermostat, it looks like the sleeve moves
up. FWIW.
Bob Haskell
AHCA 3000 Mk I registrar
http://www.ciahc.org/registry_3000mk1.php
On 04/01/2013 02:54 PM, Bob Spidell wrote:
> Nope. It's a sleeve about 5/8" wide with three tangs that were soldered
> to the bottom of the Robertshaw thermostat, which moves down when it opens.
>
>
>
> On 4/1/2013 10:54 AM, Steve Gerow wrote:
>>
>> Bob,
>>
>> Are you using the Moss blanking sleeve for this?
>>
>> I bought one of their fail-open t-stats (its a Motorad) and was
>> wondering if I can just insert the blanking sleeve and put the t-stat
>> in on top of it not sure what Id solder to what.
>>
>> --
>>
>> *Steve Gerow*
>>
>> >>>
>>
>> Date: Mon, 01 Apr 2013 09:29:46 -0700
>> From: Bob Spidell <bspidell@comcast.net
>> <https://mbox.hoster902.com/compose.php?to=bspidell@comcast.net>>
>> To: healeys@autox.team.net
>> <https://mbox.hoster902.com/compose.php?to=healeys@autox.team.net>
>> Subject: Re: [Healeys] BJ8 radiator cap issue
>> Message-ID: <5159B5FA.5070601@comcast.net
>> <https://mbox.hoster902.com/compose.php?to=5159B5FA.5070601@comcast.net>>
>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>
>> The 160deg sleeved thermostat I got was a standard Stewart/Robertshaw
>> thermostat with a sleeve soldered on. I
>> desoldered the sleeve and soldered it to a 180deg Stewart thermostat.
>>
>> http://www.stewartcomponents.com/tech_tips/Tech_Tips_3.htm
>>
>> Bob
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|