healeys
[Top] [All Lists]

Re: [Healeys] windshield wiper switch

To: healeys@autox.team.net
Subject: Re: [Healeys] windshield wiper switch
From: Oudesluys <coudesluijs@chello.nl>
Date: Fri, 27 Jun 2014 13:25:14 +0200
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <CANQM1P+6O7DvU+drZa89-=rPXWyLUr98ci--26KH3qgaN7DN4g@mail.gmail.com> <E672D2C5E0AB454985920B5A26420BC8@livingroompc> <CANQM1P+BDu6ZhkT-rsBaTh5t8vVQGb3eP-Q5k51vD6_-Ne8u=Q@mail.gmail.com>
User-agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0
To save these old switches it is best to wire in a relay. This will 
allow only a very small current through the switch so it will not 
wear/burn out, leaving the main current being handled by the relay.
Kees Oudesluijs
NL

Tom schreef op 18-6-2014 16:35:
> Greg,
>
> Thanks!  The contact cleaner I sprayed in was acting as a lubricant, and
> after the cleaner evaporated, the switch wouldn't work.  I opened the
> switch, applied some lubricam, and now the switch works perfectly.
>
> - Tom
>
>
>
> On Mon, Jun 16, 2014 at 8:43 PM, Greg Lemon <glemon@neb.rr.com> wrote:
>
>> If you pry off the back cover there are usually a couple plates that
>> toggle back and forth to make contact and are attached to springs, which
>> supply the force that causes them to flip and make the clicking sound when
>> you flip the switch, I have successfully taken these types of switches
>> apart and fixed them, and I have also ended up with broken unusable bits,
>> but worth a try, it is small parts,  fiddly type work.
>>
>> Greg Lemon
>>
>> --------------------------------------------------
>> From: "Tom" <ah3000me@gmail.com>
>> Sent: Monday, June 16, 2014 6:33 PM
>> To: "Healey Mail List" <healeys@autox.team.net>
>> Subject: [Healeys] windshield wiper switch
>>
>>   Hi,
>>> I got caught in the rain last week with my 66 BJ8, and I found myself
>>> wrestling with a tempermental windshield wiper switch.
>>>
>>> Back in the garage, I found that spraying a bit of electric contact
>>> cleaner
>>> down the front of the switch will make it work properly.  The switch made
>>> a
>>> sharp click noise when turned on or off, and the wipers turned on or off
>>> as
>>> they should.   But a half-hour later, there's no noise when I turn the
>>> switch to the on position, and the wipers do not work.
>>>
>>> Can these switches be cleaned and made to work properly?
>>>
>>> thanks,
>>>
>>> Tom
>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation  $12.75
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>>
>>> Healeys@autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>>
>>> Unsubscribe/Manage: http://autox.team.net/mailman/
>>> options/healeys/glemon@neb.rr.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2014.0.4592 / Virusdatabase: 3972/7733 - datum van uitgifte: 06/24/14
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>