I do the same, but add a hose clamp around the cut in the socket so it
won't spread around the nut when pressure is applied. Works for me. DP
On 2/6/2019 8:40 PM, healeymanjim wrote:
> i took a good quality long 5/8 socket and cut a slot in it about one and a
> half inches long. i always soak the nut for a few
> days in penetrating oil. still have a problem sometimes and have to work it
> back and forth carefully to keep from stripping
> the nut.
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My World
go here: WWW.PORTERBIKES.COM/
This email has been checked for viruses by AVG.
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive