This is a multi-part message in MIME format.
--===============0569369504472088248==
boundary="------------A75EB956962FF75B1403F87B"
Content-Language: en-US
This is a multi-part message in MIME format.
--------------A75EB956962FF75B1403F87B
Content-Transfer-Encoding: 8bit
I solved this by having a gasket maker in Lubbock make individual 0.0025
rings to provide a little more squish around each bore. Dave
On 1/26/2021 11:09 AM, WILLIAM B LAWRENCE wrote:
> If you are going to use a steel or MLS gasket you are going to have to
> resurface the block and head. They need a finer finish than copper.
>
> Bill Lawrence
> BN1 #554
> ------------------------------------------------------------------------
> *From:* Healeys <healeys-bounces@autox.team.net> on behalf of Alan
> Seigrist <healey.nut@gmail.com>
> *Sent:* Tuesday, January 26, 2021 2:54 AM
> *To:* Michael Oritt <michael.oritt@gmail.com>
> *Cc:* Healey list <Healeys@autox.team.net>
> *Subject:* Re: [Healeys] 100-4 engine head gasket?
> Hi Michael -
>
> Sounds to me the smart thing to do is put in a steel head gasket
> because the head was rebuilt not that many miles ago, so I might have
> a low spot there. The head is torqued correctly so that's not it.
>
> Best,
>
> Alan
>
>
>
> On Mon, Jan 25, 2021 at 10:27 PM Michael Oritt
>
> Probably blown gasket at the 3-4 bridge. My original head
> suffered from erosion of the metal at the 1-2 bridge, allowing the
> gasket to blow. I had it built up enough to work for a while but
> eventually replaced the head with a DWR AL model.
>
> Best--Michael Oritt
>
> On Mon, Jan 25, 2021 at 4:55 AM Alan Seigrist
>
> All -
>
> My A90 just started running weird. So I took a compression
> tester and I'm getting (note the A90 is lower compression than
> the 100):
>
> 1 - 135 psi
> 2 - 135 psi
> 3 - 60 psi
> 4 - 60 psi
>
> When I put the compression tester on number 3, I get blow back
> through #4 spark plug port. Then when I put it on #4 I get
> blow back through the #3 spark plug port.
>
> Seems to me it's just a blown head gasket.... am I correct?
> as far as I'm aware, these heads usually crack between 2 & 3,
> correct?
>
> TIA
>
> Alan
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> <http://www.team.net/donate.html>
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> <http://www.team.net/pipermail/healeys>
> http://autox.team.net/archive <http://autox.team.net/archive>
>
> http://autox.team.net/mailman/listinfo/healeys
> <http://autox.team.net/mailman/listinfo/healeys>
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com
>
> <http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com
>
--
Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My World
go here: WWW.PORTERBIKES.COM/
--------------A75EB956962FF75B1403F87B
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
</head>
<body>
<p>I solved this by having a gasket maker in Lubbock make individual
0.0025 rings to provide a little more squish around each bore.
Dave<br>
</p>
<div class="moz-cite-prefix">On 1/26/2021 11:09 AM, WILLIAM B
LAWRENCE wrote:<br>
</div>
<blockquote type="cite"
cite="mid:BYAPR15MB2213D3D391F9968689522349A5BC9@BYAPR15MB2213.namprd15.prod.outlook.com">
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
<div>If you are going to use a steel or MLS gasket you are going
to have to resurface the block and head. They need a finer
finish than copper.</div>
<div><br>
</div>
<div>Bill Lawrence</div>
<div>BN1 #554</div>
<hr style="display:inline-block;width:98%" tabindex="-1">
<div id="divRplyFwdMsg" dir="ltr"><font style="font-size:11pt"
face="Calibri, sans-serif" color="#000000"><b>From:</b>
Healeys <a class="moz-txt-link-rfc2396E"
href="mailto:healeys-bounces@autox.team.net";><healeys-bounces@autox.team.net></a>
on behalf of
Alan Seigrist <a class="moz-txt-link-rfc2396E"
href="mailto:healey.nut@gmail.com";><healey.nut@gmail.com></a><br>
<b>Sent:</b> Tuesday, January 26, 2021 2:54 AM<br>
<b>To:</b> Michael Oritt <a class="moz-txt-link-rfc2396E"
href="mailto:michael.oritt@gmail.com";><michael.oritt@gmail.com></a><br>
<b>Cc:</b> Healey list <a class="moz-txt-link-rfc2396E"
href="mailto:Healeys@autox.team.net";><Healeys@autox.team.net></a><br>
<b>Subject:</b> Re: [Healeys] 100-4 engine head gasket?</font>
<div> </div>
</div>
<div>
<div dir="ltr">Hi Michael -
<div><br>
</div>
<div>Sounds to me the smart thing to do is put in a steel
head gasket because the head was rebuilt not that many miles
ago, so I might have a low spot there. The head is torqued
correctly so that's not it.</div>
<div><br>
</div>
<div>Best,</div>
<div><br>
</div>
<div>Alan<br>
<div><br>
</div>
<div><br>
</div>
</div>
</div>
<br>
<div class="x_gmail_quote">
<div dir="ltr" class="x_gmail_attr">On Mon, Jan 25, 2021 at
10:27 PM Michael Oritt <<a
href="mailto:michael.oritt@gmail.com";
moz-do-not-send="true">michael.oritt@gmail.com</a>>
wrote:<br>
</div>
<blockquote class="x_gmail_quote" style="margin:0px 0px 0px
0.8ex; border-left:1px solid rgb(204,204,204);
padding-left:1ex">
<div dir="ltr">
<div class="x_gmail_default" style="color:rgb(51,51,255)">Probably
blown gasket at the 3-4 bridge. My original head
suffered from erosion of the metal at the 1-2 bridge,
allowing the gasket to blow. I had it built up enough
to work for a while but eventually replaced the head
with a DWR AL model. </div>
<div class="x_gmail_default" style="color:rgb(51,51,255)"><br>
</div>
<div class="x_gmail_default"
style="color:rgb(51,51,255)">Best--Michael
Oritt</div>
</div>
<br>
<div class="x_gmail_quote">
<div dir="ltr" class="x_gmail_attr">On Mon, Jan 25, 2021
at 4:55 AM Alan Seigrist <<a
href="mailto:healey.nut@gmail.com"; target="_blank"
moz-do-not-send="true">healey.nut@gmail.com</a>>
wrote:<br>
</div>
<blockquote class="x_gmail_quote" style="margin:0px 0px
0px 0.8ex; border-left:1px solid rgb(204,204,204);
padding-left:1ex">
<div dir="ltr">All -
<div><br>
</div>
<div>My A90 just started running weird. So I took a
compression tester and I'm getting (note the A90 is
lower compression than the 100):<br>
<br>
1 - 135 psi<br>
2 - 135 psi</div>
<div>3 - 60 psi</div>
<div>4 - 60 psi</div>
<div><br>
</div>
<div>When I put the compression tester on number 3, I
get blow back through #4 spark plug port. Then when
I put it on #4 I get blow back through the #3 spark
plug port.<br>
<br>
Seems to me it's just a blown head gasket.... am I
correct? as far as I'm aware, these heads usually
crack between 2 & 3, correct?</div>
<div><br>
</div>
<div>TIA<br>
<br>
Alan</div>
</div>
_______________________________________________<br>
Support Team.Net <a
href="http://www.team.net/donate.html";
rel="noreferrer" target="_blank"
moz-do-not-send="true">
http://www.team.net/donate.html</a><br>
Suggested annual donation $12.75<br>
<br>
Archive: <a
href="http://www.team.net/pipermail/healeys";
rel="noreferrer" target="_blank"
moz-do-not-send="true">
http://www.team.net/pipermail/healeys</a> <a
href="http://autox.team.net/archive"; rel="noreferrer"
target="_blank" moz-do-not-send="true">
http://autox.team.net/archive</a><br>
<br>
<a href="mailto:Healeys@autox.team.net"; target="_blank"
moz-do-not-send="true">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys";
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a
href="http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com";
rel="noreferrer" target="_blank"
moz-do-not-send="true">
http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com</a><br>
<br>
</blockquote>
</div>
</blockquote>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre"
wrap="">_______________________________________________
Archive: <a class="moz-txt-link-freetext"
href="http://www.team.net/pipermail/healeys";>http://www.team.net/pipermail/healeys</a>
<a class="moz-txt-link-freetext"
href="http://autox.team.net/archive";>http://autox.team.net/archive</a>
<a class="moz-txt-link-abbreviated"
href="mailto:Healeys@autox.team.net";>Healeys@autox.team.net</a>
<a class="moz-txt-link-freetext"
href="http://autox.team.net/mailman/listinfo/healeys";>http://autox.team.net/mailman/listinfo/healeys</a>
</pre>
</blockquote>
<pre class="moz-signature" cols="72">--
Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My World
go here: <a class="moz-txt-link-abbreviated"
href="http://WWW.PORTERBIKES.COM/";>WWW.PORTERBIKES.COM/</a></pre>
</body>
</html>
--------------A75EB956962FF75B1403F87B--
--===============0569369504472088248==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============0569369504472088248==--
|