RE: Piston Slap ? Non LSR

land-speed

RE: Piston Slap ? Non LSR

To:	"bennevl" <bennevl@netzero.net>, <land-speed@autox.team.net>
Subject:	RE: Piston Slap ? Non LSR
From:	"Dave Dahlgren" <ddahlgren@snet.net>
Date:	Sat, 27 Dec 2003 07:32:03 -0500

Found this one as well and makes the most sesnse so far it about halfway
down the page. With an alloy block it grows about 0.015 inches from cold to
hot. If the bearings are loose fit as this suggestes then the piston can hit
the carbon on the heads with the engine cold as they are 0.015 closer.
dave

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Piston Slap ? Non LSR, bennevl RE: Piston Slap ? Non LSR, Dave Dahlgren <= Re: Piston Slap ? Non LSR, John Beckett RE: Piston Slap ? Non LSR, Smith, Bill Re: Piston Slap ? Non LSR, Jon Wennerberg RE: Piston Slap ? Non LSR, ardunbill Piston Slap ? Non LSR, Jonathan Amo RE: Piston Slap ? Non LSR, Ed Van Scoy Re: RE: Piston Slap ? Non LSR, Sparky

Previous by Date:	RE: John Lingenfelter passes away at age 58., Landspeed Louise Ann Noeth
Next by Date:	Re: Piston Slap ? Non LSR, John Beckett
Previous by Thread:	Piston Slap ? Non LSR, bennevl
Next by Thread:	Re: Piston Slap ? Non LSR, John Beckett
Indexes:	[Date] [Thread] [Top] [All Lists]