Hi Jarl and group
I would be interested in photos of how the trafficators are mounted.
I started with nothing, so this would be a big help.
Gerry Weber, PA 0297
----- Original Message -----
From: "Jarl or Carol" <Jarl@deboer.net>
To: "Gillian Morbey" <gill.morbey@virgin.net>
Cc: <DSBonar@aol.com>; <mg-mmm@autox.team.net>
Sent: Tuesday, September 17, 2002 3:56 PM
Subject: Re: Trafficator mounting-PA
> Given a little time, I'd be glad to photo, scan, and upload pictures of
> theunmolested-since before-1950 trafficator on my PB ....
>
> let me know if there's enough interest to go thru the work of stripping
off the
> inner paneling for access.
>
> One is good, the other has the guts missing, so thanks for the source tip!
>
> I NEED A PAIR OF P TYPE HEADLIGHT ARMS.
>
> Jarl de Boer
> **************
> Gillian Morbey wrote:
>
> > Don,
> >
> > The remains of my now discarded PA body had a very thin plywood cladding
> > beneath the steel panel just in front of the door. But it was really
thin
> > (3 ply at most) with the leaves being very much thinner than you see
these
> > days. I don't recall the body frame being rebated to take the ply
either.
> >
> > I'd be interested in details of the the fixings for the trafficators if
> > anyone could e mail me or send a sketch. Incidentally, Bryan Purves is
> > planning a batch of replica complete trafficators - he had a trial
sample on
> > display at Silverstone in July this year. His www site is
> > http://www.bryanpurves.co.uk/ or contact him on Brypurves@aol.com (usual
> > disclaimers.....)
> >
> > Regards
> > Dick Morbey PA0743
> > ----- Original Message -----
> > From: <DSBonar@aol.com>
> > To: <mg-mmm@autox.team.net>
> > Sent: Tuesday, September 17, 2002 5:18 PM
> > Subject: Trafficator mounting-PA
> >
> > > Does anyone have pictures of the mounting of the trafficator housing
or
> > "Box"
> > > for a PA? Preferably one from the inside showing the relationship to
the
> > > wooden frame members?
> > > Additionally, isn't the body paneled with thin wood at that same
location?
> > > Mine is open with a wood frame perimeter and a metal support strap
> > visible.
> > > If it (the open space) to be enclosed, it would appear that I need to
use
> > a
> > > router to cut a rabbit in the frame so the paneling does not stand
> > "proud."
> > > Or ... is the wood simply lapped over the frame and cut to fit?
> > > Thanks,
> > >
> > > Don B.
> > >
> > > /// unsubscribe/change address requests to majordomo@autox.team.net
or
> > try
> > > /// http://www.team.net/cgi-bin/majorcool
> > > /// http://www.team.net/mailman/listinfo
> > > /// Archives at http://www.team.net/archive/mg-mmm
> > > /// Send list postings to mg-mmm@autox.team.net
> >
> > /// unsubscribe/change address requests to majordomo@autox.team.net or
try
> > /// http://www.team.net/cgi-bin/majorcool
> > /// http://www.team.net/mailman/listinfo
> > /// Archives at http://www.team.net/archive/mg-mmm
> > /// Send list postings to mg-mmm@autox.team.net
>
> /// unsubscribe/change address requests to majordomo@autox.team.net or
try
> /// http://www.team.net/cgi-bin/majorcool
> /// http://www.team.net/mailman/listinfo
> /// Archives at http://www.team.net/archive/mg-mmm
> /// Send list postings to mg-mmm@autox.team.net
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|