Hi MMM Listers,
My NB came w/o any trafficators and if The P and N are similar, I too wd
be very grateful for any info esp. photos and sketches.
.....Pat Mullen NA0895
Gerry Weber wrote:
>
> Hi Jarl and group
>
> I would be interested in photos of how the trafficators are mounted.
> I started with nothing, so this would be a big help.
>
> Gerry Weber, PA 0297
>
> ----- Original Message -----
> From: "Jarl or Carol" <Jarl@deboer.net>
> To: "Gillian Morbey" <gill.morbey@virgin.net>
> Cc: <DSBonar@aol.com>; <mg-mmm@autox.team.net>
> Sent: Tuesday, September 17, 2002 3:56 PM
> Subject: Re: Trafficator mounting-PA
>
> > Given a little time, I'd be glad to photo, scan, and upload pictures of
> > theunmolested-since before-1950 trafficator on my PB ....
> >
> > let me know if there's enough interest to go thru the work of stripping
> off the
> > inner paneling for access.
> >
> > One is good, the other has the guts missing, so thanks for the source tip!
> >
> > I NEED A PAIR OF P TYPE HEADLIGHT ARMS.
> >
> > Jarl de Boer
> > **************
> > Gillian Morbey wrote:
> >
> > > Don,
> > >
> > > The remains of my now discarded PA body had a very thin plywood cladding
> > > beneath the steel panel just in front of the door. But it was really
> thin
> > > (3 ply at most) with the leaves being very much thinner than you see
> these
> > > days. I don't recall the body frame being rebated to take the ply
> either.
> > >
> > > I'd be interested in details of the the fixings for the trafficators if
> > > anyone could e mail me or send a sketch. Incidentally, Bryan Purves is
> > > planning a batch of replica complete trafficators - he had a trial
> sample on
> > > display at Silverstone in July this year. His www site is
> > > http://www.bryanpurves.co.uk/ or contact him on Brypurves@aol.com (usual
> > > disclaimers.....)
> > >
> > > Regards
> > > Dick Morbey PA0743
> > > ----- Original Message -----
> > > From: <DSBonar@aol.com>
> > > To: <mg-mmm@autox.team.net>
> > > Sent: Tuesday, September 17, 2002 5:18 PM
> > > Subject: Trafficator mounting-PA
> > >
> > > > Does anyone have pictures of the mounting of the trafficator housing
> or
> > > "Box"
> > > > for a PA? Preferably one from the inside showing the relationship to
> the
> > > > wooden frame members?
> > > > Additionally, isn't the body paneled with thin wood at that same
> location?
> > > > Mine is open with a wood frame perimeter and a metal support strap
> > > visible.
> > > > If it (the open space) to be enclosed, it would appear that I need to
> use
> > > a
> > > > router to cut a rabbit in the frame so the paneling does not stand
> > > "proud."
> > > > Or ... is the wood simply lapped over the frame and cut to fit?
> > > > Thanks,
> > > >
> > > > Don B.
> > > >
> > > > /// unsubscribe/change address requests to majordomo@autox.team.net
> or
> > > try
> > > > /// http://www.team.net/cgi-bin/majorcool
> > > > /// http://www.team.net/mailman/listinfo
> > > > /// Archives at http://www.team.net/archive/mg-mmm
> > > > /// Send list postings to mg-mmm@autox.team.net
> > >
> > > /// unsubscribe/change address requests to majordomo@autox.team.net or
> try
> > > /// http://www.team.net/cgi-bin/majorcool
> > > /// http://www.team.net/mailman/listinfo
> > > /// Archives at http://www.team.net/archive/mg-mmm
> > > /// Send list postings to mg-mmm@autox.team.net
> >
> > /// unsubscribe/change address requests to majordomo@autox.team.net or
> try
> > /// http://www.team.net/cgi-bin/majorcool
> > /// http://www.team.net/mailman/listinfo
> > /// Archives at http://www.team.net/archive/mg-mmm
> > /// Send list postings to mg-mmm@autox.team.net
>
> /// unsubscribe/change address requests to majordomo@autox.team.net or try
> /// http://www.team.net/cgi-bin/majorcool
> /// http://www.team.net/mailman/listinfo
> /// Archives at http://www.team.net/archive/mg-mmm
> /// Send list postings to mg-mmm@autox.team.net
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|