mg-t
[Top] [All Lists]

Fw: Axle Housing

To: "MGT List" <mg-t@autox.team.net>
Subject: Fw: Axle Housing
From: "Ernie Betts" <ebetts3@email.msn.com>
Date: Fri, 3 Dec 1999 17:05:37 -0500
-----Original Message-----
From: Ernie Betts <ebetts3@email.msn.com>
To: Carolyn/Rick <walters@mail.softcom.net>
Date: Friday, December 03, 1999 5:01 PM
Subject: Re: Axle Housing


>Yes it's been done for at least 25 years.  A friend of mine did it in 1974
>and many others have done the same.  Remember, the A spring arch stands are
>slightly wider.  Some have rewelded them.  Rotate the backing plates 180
>degrees for the hand brake cable.   Remember the MGA brakes are larger and
>some complain about unequal front/rear braking.   You will need to made an
>adapter if you ever need to use the spare (5 bolt rim) on the rear end.
>Most people will not count the vent holes but I think the MGA has 1 less
>than the TD/TF.  There was an article by Chip Old in the TSO back in the
>'70's on this as it was a very easy method to convert a TD/TF to wire
wheels
>by using MGA rears and fronts.  Some have even put one MGA disks on the
>front.
>-----Original Message-----
>From: Carolyn/Rick <walters@mail.softcom.net>
>To: mg-t@autox.team.net <mg-t@autox.team.net>
>Date: Friday, December 03, 1999 12:39 AM
>Subject: Axle Housing
>
>
>>
>>
>>Hi All,
>>
>>I've been working diligently on the TD for a month.  Now is the time to
>>look at the Diff axle housing.  When I strip all the pieces away I find
>>that the housing is badly grooved where the U-bolt spring clamps were.
>>
>>Is there any thing I can do to fix this.  One is quite deep, almost
>>3/16".  I don't understand why I didn't severe the axle in two when
>>driving her.    It is a very substantial groove.  All the places where
>>the u-bolts were are grooved but one is the worst.
>>
>>Anyone ever put a MGA axle housing under a T series?  I have a complete
>>one of those in great shape right now.  I was going to transplant the
>>ring and pinion into the TD diff.  I also have the wheels as they are a
>>4 bolt.  They even look the same and the hub caps will fit too.
>>
>>TIA
>>
>>Cheers
>>
>>Rick
>>--
>>52 MGTD,Sparky    74 MGB, B-tris    76 XJ12 Coupe, Jacque
>>60 Bugeye, Puddles      58 MGA Coupe, Ruby
>>http://www.softcom.net/users/walters
>>http://www.geocities.com/Heartland/Acres/4644
>
>




<Prev in Thread] Current Thread [Next in Thread>