mg-t
[Top] [All Lists]

RE: Next Problem...

To: "'Scott Allen'" <sallen6363@gmail.com>, <mg-t@autox.team.net>
Subject: RE: Next Problem...
From: "Richard Taylor" <rgt3000@fuse.net>
Date: Thu, 9 Feb 2006 11:54:45 -0500
Directions for the relay from TTalk

http://www.ttalk.info/Tech/BrakeLightRelay.html


Ttalk.info
by
Bud Krueger

Worked very well for me

Rick
51 MG TD
Cincinnati, OH

-----Original Message-----
From: owner-mg-t@autox.team.net [mailto:owner-mg-t@autox.team.net] On Behalf
Of Scott Allen
Sent: Thursday, February 09, 2006 11:04 AM
To: mg-t@autox.team.net
Subject: RE: Next Problem...

I put in the Moss third brake light rather than going to brighter bulbs.
Maybe a relay is required in this case too?  Do you remember which TSO it
was in?

Thanks,

SCott



---------- Forwarded message ----------
From: Wayne Francis <whfrancis@sbcglobal.net>
Date: Feb 9, 2006 10:18 AM
Subject: RE: Next Problem...
To: Bud Krueger <budkrueger@earthlink.net>
Cc: mg-t@autox.team.net

Another thought:  Thinking back to a recent article about putting a relay
into the brake electrics to take some of the load off the switch, by any
chance did you replace your brake bulbs with higher ampere bulbs during the
resto?  Maybe fried the contacts with too much load?
Wayne Francis
Ojai, CA

PS.  I'm planning to install that relay.

-----Original Message-----
From: owner-mg-t@autox.team.net [mailto:owner-mg-t@autox.team.net] On Behalf
Of Bud Krueger
Sent: Thursday, February 09, 2006 6:22 AM
To: Scott Allen
Cc: mg-t@autox.team.net
Subject: Re: Next Problem...

Scott,

One little thing that tends to get overlooked -- the brake light line is
only powered when the ignition switch is on.  It's one of the green
wires attached to terminal A4 of the fuse block.  Others are the
screenwiper, petrol warning light and turn signals.

Bud Krueger
a/k/a admin@ttalk.info

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t


<Prev in Thread] Current Thread [Next in Thread>