Use a piece of 1 1/2" stainless pipe in the middle of the hose connected
with hose clamps. The smaller O.D. will provide the clearance.
Jim Stuart
-----Original Message-----
From: owner-mgb-v8@autox.team.net [mailto:owner-mgb-v8@autox.team.net]On
Behalf Of Jim Miller
Sent: Tuesday, July 08, 2003 10:15 PM
To: MGBV8
Subject: Lower radiator hose rub issue.
I am using a D&D radiator and swivel oil filter
adapter on a 78B and having trouble with the swivel
filter adapter rubbing on the lower radiator hose. I
had rigged up a shield several years ago, which worked
fine for the last few years. Was looking it over
closely tonight and noticed that the swivel filter
adapter has rubbed through the shield and just about
through the hose. What is the trick in getting the
lower hose through this tight spot?
Jim Miller
78B Buick 215
__________________________________
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|