On Mon, 15 Jan 1996, James Fischer wrote:
> Using a standard 3/8" inch wrench with an adapter for 1/2" drive
> sockets works like a champ on Midgets. The adapter is a square
> gizmo, and it fits the square hole in the fill/drain plugs
> perfectly. The other good news is that you can put the adapter
> on the end of an extension to keep your wrench (and hand) away
> from the oil that tends to spurt out when removing a drain plug.
>
> The transmission fill plug is identical, at least on my Midget.
On my 67, the size is between 3/8 and 1/2. 7/16" ?
ULix
__/__,__ ________/____,,_______
................... (_o____o_) ..... (___ O _________ O ___/ ..............
sprite caddy
|