>I don't know the length of the MGC air cleaner bolts, but if we are
>talking about 2 inches, one possible source is the Austin America
>with the single HS4 carb.
One thing I learned al long time ago, was that you can get an amazing
number of MG parts by going to the generic auto parts store and holding the
part up & asking if they have "one of these." When I was in grad school in
Pittsburgh, PA (where foreign cars were a bad thing in the 70's) I was very
successful in getting many parts for my MGA in that manner.
I recently did the came thing for my MGB carb filters. I determined the
thread I needed & the required length. Iwent to the local auto parts store
& asked the counter person for a stud with such & such thread x inces long
- and they handed them to me.
John
John A. Wise, Ph.D., CHFP Tel: (+1) (904) 226-6384
Center for Aviation/Aerospace Research Fax: (+1) (904) 226-7050
Embry-Riddle Aeronautical University E-mail: wise@db.erau.edu
600 South Clyde Morris Blvd.
Daytona Beach, FL 32114-3900 USA
|